Amorphous Layer insulation folding machine
The amorphous layer insulation folding machine is mainly used for folding insulating paper between layers of transformer coils to insulate them in layers.
Product Description
Introduction:
The amorphous layer insulation folding machine is mainly used for folding insulating paper between layers of transformer coils to insulate them in layers.The end insulation structure is formed at the two edges, which improves the mechanical strength and winding power of the coil and reduces the material cost.
Composition:
1)Decoiling equipment 2)Guide apparatus 3) Pinhole forming device | ||
4) Folding channel、5 )Molding device、6) owing device | ||
7)Winding device 8)Electrical system and pneumatic system, etc | ||
Insulating paper roll specifications | Bore: θ76 mm | Outer diameter:≤θ400 mm |
After forming the paper specifications | Bore: θ76 mm | Outer diameter:≤θ400 mm |
Insulating paper width130----700mm | ||
Thickness of insulation paper0.10----0.21mm | ||
Folding layers 5 layers /(including the bottom layer) | ||
Folding width 6 mm/10 mm | ||
Flanging forming speed 0---20 M/min(frequency stepless governor ) | ||
