| Technical Data | Method of Verification | Unit | 3025 |
| I.Physical Properties | |||
| Density | ISO 1183 | g/cm3 | 1.5-1.6 |
| Water absorption 24hrs | ISO 62 | % | ≤2.2 |
| III.Thermal Properties | |||
| Heat stability(≤20mm) | ISO 75-2 | ºC | ≥110 |
| Heat stability(≥20mm) | ISO 75-2 | ºC | 90 |
| Max. service temperature -Short term | ISO 75-2 | ºC | 300 |
| Max. service temperature - Long term | ISO 75-2 | ºC | 140 |
| Flammability | UL 94 | Class | HB |
| II.Mechanical Properties | |||
| Tensile strength at yield | ISO 527-2 | MPa | ≥83 |
| Tensile strength at break | ISO 527-2 | Mpa | / |
| Hardness - Shore D | DIN 53505 | 115-118 | |
| Impact strength | ISO 179 | kJ/m2 | ≥43 |
| Bending Strength | ISO 527-2 | Mpa | ≥105 |
| Flexural strength | ISO 179 | Mpa | ≥120 |
| Adhesive Strength | ISO 179 | N | 5500 |
| Compression strength-vertical | ISO 179 | Mpa | ≥245 |
| Compression strength-parallel | ISO 179 | Mpa | ≥147 |
| IV.Electrical Properties | |||
| Volume resistively | IEC 60093 | Ohm (Ω) * cm | 10^7~10^8 |
| Surface resisively | IEC 60093 | Ohm (Ω) | / |
| Electric strength- LW | VDE 0303 | KV | ≥10 |
| Breakdown Voltage-CW | VDE 0303 | mV/m | ≥0.82 |
| Relative dielectric coefficient | VDE 0303 | / | / |
| Dielectric Loss Factor at 1MHz | VDE 0303 | / | / |
| NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m | |||
| Statement: | |||
| Property data contained herein are typical values of resin for your reference and comparison purposes only. PRIOR will not provide any legally binding guarantee of certain properties, or any suitability. | |||
