Transformer Parts/Accessories Laminated Wood/Laminated Wood Processing Piece

Description
Plywood is produced by gluing together, in high temperature (145-150ºC) and under high pressure (6-12 MPa), beech veneers 2 mm thick bonded with special phenol-formaldehyde resin.Structure of transformer plywood can be crossed when the grain in neighbouring layers is at right angle and parallel with the grain laid parallel in each layer.

Features
Excellent dielectric and mechanical properties.
 
Applications
it is widely used for production of power transformers.

Appearance Quality


Manufacturing process
After being cut to size, each individual piece of veneer is impregnated with phenolic resin in a vacuum autoclave. Following impregnation, the pieces of veneer are baked in an oven to achieve a "B-stage" (partially cured) condition. The next step is to arrange and to stack the veneers to the desired configuration and thickness. Lamination, densification and complete curing are accomplished simultaneously in specially designed hot press machine.

 
Standard sizes
1500 x 1000 mm
1000 x 1500 mm
2000 x 1000 mm
3000 x 3000 mm
customized sizes and shapes are welcomed.